True Sense Technologies

·       Model No: EMF-522

·       Display: 3 ½ Digits

·       LCD Counts: 1999

·       Range: 200 - 200μT

·       Resolution: 0.1 - 0.1μT

·       Accuracy: ± (2.5%+6)

·       Frequency: 30Hz - 300Hz

·       Sample Rate: 2.5 times/SOperating

·       Temperature: 5 °C - 40 °COperating Humidity: below 80% RH

·       Storage Temperature: -10 °C - 60 °C

·       Starage Humidity: below 70% RH

·       Power: 9V Battery

·       Battery Life: 100 hours Standard

·       Accessories: Carrying case, Manual, 9V Battery

·       Dimensions: 130 x 56 x 38mm

• Voltage Range - 90V to 1000V AC.
• Display LED (flashing) & Acoustic Sound Signal.
• Auto power Off (approx.five minutes).
• Bright White LED Flash Light.
• IP- Protection - IP40.
• Overvoltage Category - CAT IV, 1000V.
• Power Supply - 2 AAA Battery.
• Standard Accessories - 2 AAA Battery.
• Dimension - 145 (W) x 25 (H) x 21 (D) mm.

Features:

·       Low Battery Indication Approx. < 7.5

·       Sampling Rate 3 times per second

·       Battery 9V(6F22)

·       3½ Digit Display

·       2000 Counts

·       Large LCD Display

·       Full Protection function, capacitor with the function of Self discharge

·       Strong antimagnetic and anti-jamming performance.

• 4 Digits, 18mm LCD Display 
• Auto Power OFF 
• Max. Hold 
• Measure Accelerator / Velocity / Displacement with RPM & Frequency 
• Metric / Imperial Measurement 
• Low Battery Indicator 
• AC output socket for headphones and recording 
• Optional Headphones for use as electronic stethoscope 
• Optional RS-232 Communication (Advanced Software Program for all windows)

• Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance.
• Use the proper terminals, function, and range for your measurements.
• Before measuring current, check the meter's fuses and turn power off to the circuit before connecting the meter to the circuit.
• Before rotating the range switch to change functions, disconnect test leads from the circuit under test.
• Before attempting to insert transistors for testing, always be sure that the test leads have been disconnected from any measurement circuits.
• Remove test leads from the meter before opening the Meter case.

9 Voltage Settings Bright LED Visual INDICATION with Buzzer Protection class IP65Non-Contact Test Detection by Proximity Light Weight, Robust and Compact The Max Detection Range Can be 500kVThe measuring wire is Horizontal with the lighting lamp placed vertical to it. The reminding distance is about 5cm when testing 240V voltage.
The corresponding voltage reminder distance for other range tests is about 20cm.
Feature:

• Frequency Range : 40 ~ 70Hz
• Voltage Ranges : 240V, 3.3kV, 11kV, 33kV, 66kV, 110kV, 220kV, 330kV, 500kV.
• OFF TEST : 240V-69kV-115kV-138kV-230kV-500kV
• POWER : 9V (6F22) X 1
• Standard Accessories : Manual & Warranty Card
• Dimension : 115 (D) x 115 (W) x 169 (H) mm

Additional Information:

• Delivery Time: 2 Days

• Voltage Tester CD-2
• Non - contact detection of AC voltage
• 24V AC ~ 600V AC
• For use on circuit
• CAT III 600V
• Measurement Method: Non-contact detection
• Voltage Sensitivity: 24 "240V
• AC voltage Range : 24VAC ~ 600VAC
• For use on 50/60Hz circuits
• CAT III 600V
• SIZE : 159 x 22mm
• POWER SUPPLY:AAA 1.5V x 2

This product is made of high quality materials and is durable and has a long service life with a large LCD data display, the readings are clear and accurate, suitable for a variety of environments. The anti-slip design of the body makes the grip comfortable and easy to use. This product can be used for both electric and magnetic field measurements, beautiful and practical with sound and light alarm, when the test result exceeds the safe value, the instrument will automatically alarm. The design is fashionable, easy to operate, easy to carry, and convenient for on-site measurement. Data lock is supported, and the radiation value is locked with one key.

Feature:

·       Power supply: 3 * 1.5V AAA battery (not included)

·       Material: ABS

·       Color: black

·       Electric field: 1-1999V

·       Magnetic field: 0.01μT -99.99μT

·       Reading display: 3-1/2-digit LCD

·       Testing bandwidth: 5Hz-3500MHz

·       Sampling time: about 0.4 seconds

·       Operating temperature: 0~50 / 30 122

·       Operating humidity: relative humidity < 80%

·       Item size: 135 * 60 * 27mm / 5.3 * 2.4 * 1.1in

·       Item weight: 107g

HTC LCD Display Pen Type Voltage Detector With Display AC-IV. HTC LCD Display Pen Type Voltage Detector With Display AC-IV of the finest quality and rest assured to get the best in terms of both durability and performance. HTC LCD Display Pen Type Voltage Detector with Display AC-IV rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure HTC LCD Display Pen Type Voltage Detector With Display AC-IV.

Features:-

·        Display LCD with Bargraph

·        Backlight Red & Green Double Colour

·        Signal Intensity four level

·        Flash Light No operation sensing signal will shutdown

·        Auto Power Off (APO 3 minutes)

•  Non-contact Voltage Tester Ranging 12-1000V AC, You can easily distinguish the live and null wire through different level of alarm sound and LED indicator.
•  Safe and Convenient The Voltage Pen Tester Detectes Voltage in a Non-Contact Way, So Do Not Worry about There Could be any Possibility of being Shocked by the Electricity
•  High Efficiency  As Long As Voltage is Detected, the Led in the Tester Pen will Shine
•  Multifunction, Easy to Use It Also Acts as an Emergency Flashlight which can Illuminate the Working Area, You can Use the Non Contact Voltage Detector in Circuit Breakers, Lighting Fixtures, Switches, Outlets, Wires and Anywhere You Need it
•  CE CAT III600V RoHS Certificate A Professional Tester, It is Perfectly Suitable also for DIY'ers, Hobbyists and Home Owners, It Helps You Make the First and the Most Important Safety Check

Additional Information:

• Delivery Time: 2

• The ghost hunting equipment range used for ghost hunting helps to measure electromagnetic fields to identify equipment that generates high radiation and enables users to decide to limit exposure.
• Easy-to-read :The colored led lights make readings obvious to notice in day light or dark; It is easy to always bring along since it fits in your pocket or purse!.
• Levels are measured to prevent potentially harmful long-term overexposure to EMF.
• Measuring a wide frequency spectrum of 50 Hz to 20,000 Hz, you can register a mobile phone with a distance of less than 2 feet
• LED Magnetic field detector table = reliable, sturdy, outstanding effect, super sensitive.

Additional Information:

• Delivery Time: 2 Days

• Sealed by "0" rings, 8 voltage settings : 240Vac, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, and 275kV
• High bright LEDs visual indication, Sound indication, Easy-to-proov method, Self-test selection.
• Use 3 x 1.5V "C" batteries, High impact nylon casing, Non-contact work by proximity, Compatible with most link sticks.
• Light weight, robust, & compact, Suitable for indoor and outdoor use, Detect low voltage on any systems, Easy access to batteries.
• No special parts needed, Simple and efficient to use.

Testing the magnetic field and electric field. Automatic alarm above safe value(40V/m or 0.4μT/4mG).

Operate with one hand and move or make field measurements. Automatically shut down after 5 minutes without operation.

Mainly used to test microwave ovens, TVs, hairdryers, computers, low-frequency household appliances, wires, etc.

Additional Information:

• Delivery Time: 2-3 Days

Additional Information:

• Delivery Time: 2-3 Days

Technical Specification:- 5 digit LED display ( including 3 digits for voltage) Frequency and amplitude display simultaneously Output waveforms: sine wave, square wave and triangle wave Frequency of output signal: 0.2Hz ~ 2MHz Duty cycle adjustable: 20% ~ 80% Width of output signal adjustable continuously Amplitude without attenuation: 0.9V ~ 10V Amplitude with -20dB attenuation; 100mV ~ 1V Amplitude with -40dB attenuation: 10mV ~100mV.

• Power - AC 110/220V
• 5 digit LED display (including 3 digits for voltage)
• Frequency of output signal : 0.2Hz ~ 2MHz
• Standard Accessories - Carrying case and manual
• Dimension - 270(H) x 215(W) x 100(D)mm

• Highest Sensitivity up to 1mV/div (After Expand) 
• Full band Trig Auto Sweep Circuit 
• Flex Trig mode (Select either CH1 or CH2 Signal / External Signal) 
• Alt-Trig View 2 in relative Signal 
• Ext Trig Input

·        Frequency Range: 0.01Hz˜2.4GHz.

·        Accuracy: Time base error X Frequency + 1 Digit.

·        Cyclic Measurement Range: 0.5nS ˜ 10S.

·        Attenuation: 20dB.

·        Channel A: (40MHz ˜ 2.4GHz) Sensivity : 50m Vrms.

·        Input resistance: 50Ω.

·        Maximum Input 3V.

·        Time Gate: 10ms ˜ 10s.

·        Input Impedance: 1MΩ.

·        Channel B (0.01Hz ˜ 40MHz) Sensitivity : 30 Vrms.

·        Input resistance: 1MΩ ( <35pF ).

·        Maximum Input: 30V.

·        8digits green led display.

·        Selective range, high stability.

·        Two channels, operation mode memory.

·        Range and gate time adjustable.

·        Power supply: Ac 110v/220v, plus10 percent, max. Consumption : 5w.

• Voltage Range - 90 V to 1000V AC.
• IP- Protection - IP40.
• Overvoltage Category - CAT IV,1000V.
• Standard Accessories - Power Supply 2 AAA Battery.
• Dimension 145 (W) x 25 (H) x 21 (D) mm.

HTC CC-01 Temperature Calibrator is a premium quality Process Calibrators from HTC. All HTC CC-01 Temperature Calibrator are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture HTC CC-01 Temperature Calibrator, are sourced from the most reliable and official Process Calibrators vendors, chosen after performing detailed market surveys. Thus, HTC products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of HTC Process Calibrators.

Feature:

·       Maximum voltage applied between any terminal and earth ground or between any two terminals: 30V

·       Storage temperature: -40 to 60

·       Operating temperature: -10 to 55

·       Operating altitude: 3000 meters maximum

·       Temperature coefficient: 0.05 x specified accuracy per  for temperature range -10 to 18 and 28 to 55

·       Relative humidity: 95% up to 30 75% up to 40  45%up to 50 35% up to 55

·       Vibration: Random 2 g, 5 Hz to 500 Hz

·       Shock:1 meter drop test

·       Power requirement: Single 9V battery (ANSI / NEDA 1604A or IEC 6LR61)

·       Size: 190mm(L) x 89mm(W) x 42mm(H)

·       Weight: 350g (include battery)

·       Safe rating: RoHS

• Multi-function, which can be used to measure altering current voltage, current, active power, power factor, frequency and electric energy.
• Adopts LCD display, large font, full-view, you can see the data clearly.
• Two types optional, you can choose AC40-300V 100A and AC250-450V 100A according to your demands.
• AC40-300V for measuring AC110V or AC220V household electricity.
• AC250-450V for measuring AC380V three-phase electricity.

Additional Information:

• Delivery Time: 2-3 Days