True Sense Technologies

1. Output type: AC Output (AC 220V 1500W).
2. Temperature setting upper and lower limits.
3. Simple operation, suitable for seafood machines.
4. Temperature Measuring Range: -50~110°C.
5. Temperature Control Range: -50~110°C.
6. Control Accuracy: Upto 0.1

Additional Information:

• Delivery Time: 2 Days

This digital humidity control controller is with wide humidity measuring range and controlling range, comes with a humidity controller sensor probe with cable. Hunidity sensor uses a high-precision capacitive faster chip which has the advantage of high accuracy to refect. Humidity measuring range is 1% ~ 99% RH and control range is 1% RH. Humidification and dehumidification can be set through the menu, the parameters has been set the power outage permanent memory function.

Specification:

• Humidity Measuring Range: 1%RH ~ 99% RH
• Humidity Measuring Error: ±3%RH
• Control Range: 1%RH
• Display precision: 1% RH
• Humidity Type: Capacitive
• Power Suppler: AC220V±10%, 50/60Hz
• Power consumption: ≤ 3W,
• Output Load: AC 10A/220V
• Working temperature: 0°C - 80 °C
• Size(L x W x H): Approx. 85 x 75 x 35mm / 3.4 x 3 x 1.4 inch
• Probe Size (L x W): Approx. 60 x 15mm / 2.4 X 0.59 inch
• Cable Length: Approx. 146cm / 57.5 inch

Functions:

• Function of humidification and dehumidification
• Hysteresis function
• Humidity correction
• Delay protection
• Function of Upper and Lower limit

Package Includes:

• 1 x Humidity controller
• 1 x Humidity controller sensor probe with cable
• 1 x Operation manual

Additional Information:

• Delivery Time: 3 Days

Humidity Control

1. Set to start humidity: long-press the + key, start the humidity value flashing, set by + / – key launch humidity value
2. Set stop humidity: long press – to stop humidity value, set by + / – key to stop the humidity value

Temperature Control

1. Setting the temperature +: Normal display mode, long-press the + key for 3 seconds, start temperature numerical flashing, press the + / – key setting values, the wrong operation after 5 seconds, automatically return to detect temperature display
2. Setting the temperature – :Normal display mode, long press – button for 3 seconds, stop numerical flashing temperature, press the + / – key set value
3. Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888
4. Setting the start temperature: Long press the + key, start the flashing temperature, set start temperature by + / – key
5. Setting Stop temperature: long press – button, stop flashing temperature, set stop temperature by + / – key

Additional Information:

• Delivery Time: 2 Days

• Temperature Control Range(°C): -50 to +110.
• Resolution @-9.9°C to +99.9°C: 0.1°C.
• Resolution @all temperatures: 1°C.
• Accuracy: 0.1°C.
• Refresh Rate(s): 0.5.
• Supply Voltage(V): 12.
• Measuring Inputs: NTC10K.
• Cable Length: 0.5 Meter.
• Output Type: 1 Channel Relay Output.
• Capacity: 10A.

Additional Information:

• Delivery Time: 2 Days

• seamlessly Switch between the temperature modes (between cool and heat).
• Temperature is controlled by setting the temperature value and the difference value.
• manual temperature calibration is available.
• Refrigerating control output delay protection is built-in.
• An alarm outputs a warning sound when the temperature exceeds temperature limit or when the sensor outputs error.

• Front panel size : 75(L) x 34.5(W)(mm)
• Mounting size: 71(L) x 29(W)mm.
• sensor length: 1m (include the probe).
• Product size75(L) x 34.5(W) x 85(D)mm.

• Temperature measuring range: -50 – 99°C.
• Resolution : 0.1°C.
• Accuracy : ±1°C (-50 – 70°C).
• Sensor error delay: 1 minute.
• Power supply: 220VAC±10%, 50/60Hz
• .Power consumption: ≤3W.
• Sensor: NTC sensor (1PC).
• Relay contact capacity : Cool 10A/250VAC;Heat 10A/250VAC.
• Ambient temperature : 0 – 60°C.
• Storage temperature : -30 – 75°C.
• Relative humidity : 20% – 85% (No condensate).

• Digital display of temperature, humidity and rotation frequency.
• The application of the microcomputer chip has strong anti-interference and high stability.
• The temperature sensor adopts a high precision sensor, has high temperature acquisition accuracy and a wide temperature range.
• It has four easy-to-use display screen designs, including two screens that show the temperature and humidity of the incubator. The other two screens show the rotation time of the egg and the hatching date. Press the button and press the button to display the preset temperature and humidity.
• Six hatching modes set by the user for chicken, duck, goose, pigeon and chimpanzee.

Additional Information:

• Delivery Time: 2 Days

Additional Information:

• Delivery Time: 2-3 Days