True Sense Technologies

The product can turn on or turn off light by automatically according to ambient-light. Ambient-temperature and humidity cant affect it. It is not only convenient but also practical; it can control the load working only at night. For instance road light, garden light etc. SPECIFICATION: Power Source: 110-130V/AC 220-240V/AC Power Frequency: 50/60Hz Rated Current: 6A Ambient Light: <5-15LUX Working Temperature: -20+40 Working Humidity: < 93%RH INSTALLATION: 1. Switch off the power. Connecting the wire as per the following figure. 2. Please install the item with the correct orientation (see figure A) what shows in the metal bracket and according to the correct installation place with the enclosed inflated screws.

Additional Information:

• Delivery Time: 2 Days

• Single beam infrared sensor with the latest LED indicator.
• Anti-glare up to 50,000 LUX to avoid glare or the influence of car lights.
• Sealing design, rainproof, fog proof, dust (worms) and other integrated weather, detector sensitivity will automatically increase (AGC circuit).
• High level of anti-RFI/EMI capability.
• High-power transmitter, sensitivity excess up to 90%.
• High Power Infrared Receiver, Low Power Technology.
• Adjustable beam cut-off time to make it more flexible and adaptable.
• Professional Anti-jamming Optical Shell.

• Turn off the power.
• Moving the transparent vinyl cover what is in the bottom of the sensor.
• Loosing the screws in the connection terminal, connecting the power and rated load to connection terminal of sensor according to connection sketch map.
• Tighten the screws; put the transparent vinyl cover into the original station.
• Folding the metal spring of the sensor to upwards, until they are in "I" position with sensor, then put the sensor into the hole or installation box what is in the ceiling, the size is similar with item. Releasing the spring, the sensor will be set in this installation position.
• After finishing installing, the sensor could be connected the power and it.

• Turn the TIME knob anti-clockwise on the minimum, turn the LUX knob clockwise on the maximum (sun).
• Turn on the power, the sensor will be electrify and warm-up,30 sec later, the item will be entered into working estate.
• 5~10 seconds after the light goes out for the first time and then sensing, the load should be worked.
• Turn LUX knob anti-clockwise on the minimum (moon). The inductor load should not work after load stop working. If youcover the detection window with the opaque objects (towel etc), the load work .under no induction signal condition, the load should stop working within 5-15sec.

• When testing in daylight, please turn LUX knob to (SUN) position, otherwise the sensor lamp could not work!

• Should be installed by electrician or experienced man.
• Avoid installing it on the unrest objects.
• There shouldn't be hindrance and moving object in front of the detection window effecting detection.
• Avoid installing it near air temperature alteration zones such as air condition, central heating, etc.
• Considering your safety, please don't open the cover when you find the hitch after installation.

• Please check the power and load connect is correct.
• Check if the load is good.
• Check if the working light corresponds to the ambient light.

• Please check if there is hinder in front of the detection window to effect receiving the signals.
• Please check if the ambient temperature is too high.
• Please check if the signals source is in the detection fields.
• Please check if the installation height corresponds to the height showed in the instruction.

• Check if there are continual signals in the detection fields.
• Check if the time delay is set to the longest.
• Check if the power corresponds to the instruction.
• Check if the temperature change obviously nears the sensor, such as air condition orcentral heating etc.

• Street Light
• Garden Lights
• Incandescent lamp
• LED lights
• Balcony Lights
• Outdoor Lights

• In order to achieve first class effective Sensing distance, please keep the sensor 1.5 meters high from the ground. 
• The light, such as incandescent lamp which emits high heat should be kept from the sensor, at least one meter, or it will be turn on/off voluntarily. 
• On being fixed to the wire first time, the sensor initialization will take 1-2 minutes. It''s natural for the switch to turn on/off voluntarily. 
• When you install the sensor on daytime, the Default State of the sensor will make the light off. Please keep the knob of the time to the minimum (i.e on the negative sign) whereas keep the knob of LUX to the moon sign side.

• 1 x Motion Sensor/Detector
• 1 x Box Packing 
• 1 x Complete User Manual 
• 2 x Screws
• 1 x Bill

This is a short distance IR sensor. Its ON or OFF is controlled by the opening and closing of the door. When you open the door, the sensor detects the motion and turns on the lights. The lights will be switched off until the door is closed.

Additional Information:

• Delivery Time: 2 Days

Special replacement, high power transmission device with a power margin of 90%. Aspheric biofocal optical focusing lens with large aspheric ternary ternary aperture precision. Complete diagnosis, environmental self-adaptation. Adopts solid state relay with long life, contactless, low voltage and micro power consumption characteristics. Horizontal angle adjustment 180 ° (± 90 °), right angle adjustment 20 ° ± 10 °.

Budget:
Plastic material
External alarm Distance: 50m 100m 150m 200m 250m
Indoor alarm Distance: 150m 300m 450m 600m 750m
Number of beams: 3 beams
Detection method: Detection of interruptions simultaneously with three light beams.
Induction speed: 35-700ms
Alarm output: Regular, normally closed and normally open (NC and NO)
Working voltage: DC 12-24V; AC 11-18V
Contact capacity: AV / DC 30V / 0.5AMax
Working temperature: -25 ° C-55 ° C
Working humidity: 5% -95% RH (x relative humidity)
Optical axis adjustment angle: horizontal 180 ° (+ - 90 ¿¿¿)
Optical axis adjustment angle: vertical 20 ° (+ - 90 ¿¿¿)
Telescopic sight: detachable
Package weight: Approx.1315g / 46.4oz

List of packages:
1 * Receiver
1 * Transmitter
2 * Large plate to hang on the wall Blakc
2 * Plate for hanging on small wall
1 * plastic holder
8 * screw
1 * user manual

Note:
1. Please allow an error of 1-3 cm due to manual measurement. Thanks for your understanding.
2. The monitors are not calibrated the same, the color of the element shown in the photos may show slightly different from the real object. Please, take the real as standard.

Specification:

Product Name : Photoelectric sensor /switch;

Model : G18-3A10PC; G18-3A30PC

Wire Type : DC 4 Wire Type (Brown, Black, Blue, With);

Switch Appearance Type : Cylinder Type,

Theory : Photoelectric sensor diffuse type;

Output Type : PNP NO+NC (Normally Open and Normally Close);

Diameter of Head : 18mm;

Detecting Distance : 30cm

Detecting Object : Metal, non metal (body, hand, paper, food ...), Transparent or opaque boday

Supply Voltage : DC 10-30V;

Current Output : 200mA;

Response Frequency : 100Hz

External Material : Plastic, Alloy

Portection grade: IP66

Color :shell color ,grey or orange, or blue.(as stock)

• In order to achieve first class effective Sensing distance, please keep the switch 1.5 meters high from the ground. 
• The light, such as incandescent lamp which emits high heat should be kept from the switch, at least one meter, or it will be turn on/off voluntarily. 
• On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily. 
• When you install the switch on daytime, the Default State of the switch will make the light off. Please keep the detector of the switch from illumination, and then the light will turn on. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counter-clockwise with a long and thin tool to get a proper light.

• Indoor Lighting / Outdoor Lighting / Intelligent Buildings
• Corridors / Pathways / Lobby / Cloakroom / Basement lighting/Parking
• Solar/Wind based application
• Washrooms/Kitchens/Stairs
• Conference Hall/Meeting Rooms
• Industrial Applications
• Security Applications

• 1 x Motion Sensor/Detector
• 1 x Box Packing 
• 1 x Complete User Manual 
• 2 x Screws
• 1 x Bill