True Sense Technologies

• Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance.
• Use the proper terminals, function, and range for your measurements.
• Before measuring current, check the meter's fuses and turn power off to the circuit before connecting the meter to the circuit.
• Before rotating the range switch to change functions, disconnect test leads from the circuit under test.
• Before attempting to insert transistors for testing, always be sure that the test leads have been disconnected from any measurement circuits.
• Remove test leads from the meter before opening the Meter case.

• 3 ½ Digit LCD 
• Optional Power Adaptor 
• HIGH Accuracy + (3% rdg + 2dgt)  
• 5 Models with Various Voltage and MOhm Range

• Smart Three Pin Socket 
• Large LCD Display with Backlight 
• Memory Retention (KWh, min) 
• Blinking LCD to indicate alarm When KW is over threshold 
• Counts CO2 generated by Electrical Equipment 

• Vertical two channel, bandwidth of each channel is 25Mhz, 60Mhz,100Mhz 
• Real-time Max Sampling rate is 500MSa/s. 
• Support communication interface RS232, USB(main sub), RJ45 LAN 
• Input attenuation 2mV/div ~ 50V/div, Easy to measure big signal 
• 5.7 inch color display screen

• Highest Sensitivity up to 1mV/div (After Expand) 
• Full band Trig Auto Sweep Circuit 
• Flex Trig mode (Select either CH1 or CH2 Signal / External Signal) 
• Alt-Trig View 2 in relative Signal 
• Ext Trig Input

• Smart Three Pin Socket 
• Large LCD Display with Backlight 
• Memory Retention (KWh, EUT) 
• Simple to use 
• Easy to handle 
• Accurate to measure 

• 8 digits green LED display Selective range, high stability Two Channels, operation mode memory Range and gate time adjustable.

Features: 

• 3 1/2 DIGIT LCD 
• Optional Power Adaptor 
• HIGH Accuracy + (3% rdg + 2dgt) 
• 5 Models with Various Voltage and Mohm Range 
• Single Person Push Button Operation 

• 3½ Digit Display 
• 2000 Counts 
• Large LCD Display 
• Full Protection function, capacitor with the function of Self discharge 
• Auto Power Off

Over Load : LCD display “OL”.Battery Life : Approximate 100 hours.Accuracy : + (2.5%+6dgt) at 50Hz/60Hz.carrying case, Manual, 9V Battery.

Buy HTC EMF-522 (Display Counts 1999) Electro Magnetic Field EMF Tester online in India at wholesale rates. If you have been looking for HTC EMF-522 (Display Counts 1999) Electro Magnetic Field EMF Tester dealers, your search ends here as you can get the best HTC EMF-522 (Display Counts 1999) Electro Magnetic Field EMF Tester distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase HTC EMF-522 (Display Counts 1999) Electro Magnetic Field EMF Tester of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the HTC EMF-522 (Display Counts 1999) Electro Magnetic Field EMF Tester prices, you can be totally sure to get the best rates, genuine HTC EMF-522 (Display Counts 1999) Electro Magnetic Field EMF Tester rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure HTC EMF-522 (Display Counts 1999) Electro Magnetic Field EMF Tester today and avail the best offers on your purchase.

Technical Specification:- 5 digit LED display ( including 3 digits for voltage) Frequency and amplitude display simultaneously Output waveforms: sine wave, square wave and triangle wave Frequency of output signal.

Microprocessor circuit & exclusive load cell transducer, Wide capacity, high resolution, high accuracy, high repeatability, Tension & Compression (Push & Pull).

• Tension & compression capability. 
• 20 Kg, wide capacity, high resolution, high accuracy, high repeatability. 
• 3 kind display unit, Kg/LB/Newton. 
• Separate sensor. 
• Peak hold ( Max. load ) measurement.
• Zero button can operate both for normal & " peak hold " operation. 
• Full capacity zero (tare) capability.
• Fast/Slow response time. 
• Positive or reverse display direction.
• Hand held & stand mounting. 
• Microprocessor circuit & exclusive load cell transducer. 
• Over load protection.

• 8 digits green LED display 
• Selective range, high stability 
• Two Channels, operation mode memory 
• Range and gate time adjustable 

Features: 

• 31/2 Digit Display 
• 2000 Counts 
• Large LCD Display 
• Full Protection function, capacitor with the function of Self discharge 
• Strong antimagnetic and anti-jamming performance.